King/Cal King Installation Guide - Sealy Ease Owner's Manual

king/cal king installation
C-Clamps (2)
Long and Short Bolts (4 of each)
Nuts (8) and Washers (16)
STEP 1
Push and align the head and foot sections together. Make sure to align
the bolt holes as seen in Fig. A. The frames also need to be aligned as
seen in Fig. B.
For customer support, call Customer Service: U.S. 1-800-499-1965 | Canada 1-800-268-4414
8
Always use two people when setting up the base.
5mm Hex Wrench (1)
13mm Wrench (1)
Fig. A Fig. B
STEP 2
Once aligned, locate 4 bolts in the middle frame. Secure bolts with
nuts and washers as seen in Fig. C and D.
Fig. C
STEP 3
Slide C-Clamp over frame connections from Fig. B. Use 2 long
bolts, washers and nuts to secure frames together using provided
wrenches. Repeat this step for the other side of the base.
Fig. E
Fig. D
Fig. F