Connecting Strap - Sealy Ease Owner's Manual

connecting strap (optional)
If any split setup is being installed, plastic Connecting Straps are provided (one per base)
STEP 1
With the bases in their
desired location, slightly
loosen both legs to allow
the strap to fit on the leg
bolt, between the leg
washer and frame.
12
to secure the bases together.
STEP 2
Slide side (a) of the Connecting Strap onto leg bolt. Swing the strap and
connect side (b) to the leg bolt. Secure the strap by shifting to the left.
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap and repeat
on other end of the base.
a
b