Sealy Ease Owner's Manual page 13

remote control
Remote Pairing
The original remote that comes in the box is already paired to the
adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.*
STEP 1
Locate the Battery Backup Box and
press the button TWICE. A light on the
Battery Back Up Box will illuminate.
POWER DOWN
Button
STEP 2
On the back of the remote, press and hold
down the PAIR button. The PAIR button will
illuminate blue and start flashing. When the
PAIR button stops flashing, the illuminated
light on the Battery Backup Box will go out.
Release the PAIR button. The remote is now
paired to the adjustable base.
STEP 3
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call
customer service: U.S. 1-800-499-1965 | Canada 1-800-268-4414
*ALTERNATE REMOTE PAIRING PROCESS!
Locate the Control Box (see parts list on page 4) and press the
reset button twice. A green LED light will illuminate on the Control
Box. On the back of the remote, press and hold the PAIR button.
The PAIR button will illuminate blue and start flashing. When the
PAIR button stops flashing, the green LED light on the Control Box
will go out. Release the PAIR button. The remote is now paired to
the adjustable base.
Child Lock Feature
Activate Child Lock
Press and hold the HEAD UP and HEAD DOWN buttons
together for approximately six (6) seconds. The remote
backlight will flash twice. When the backlight goes away the
remote is now in Child Lock. Pressing any buttons while in
Child Lock will yield no movement to your adjustable base.
Deactivate Child Lock
Press and hold the FOOT UP and FOOT DOWN buttons
together for approximately six (6) seconds. The remote
backlight will flash twice. When the backlight goes away the
remote is no longer in Child Lock. The remote and adjustable
base will work normally.
11