Sealy Ease Owner's Manual page 4

safety precautions and usage statements
Product Ratings:
The lift motors are not designed to operate continuously for more than
two [2] minutes in an eighteen [18] minute time period or approximately
10% duty cycle. Attempting to circumvent or exceed this rating will
shorten the life expectancy of the product and may void the warranty.
Weight Limits:
The recommended weight limits on the EASE
Full / Queen / King / Cal King / Cal King Split: 650 pounds
Maximum weight the bed can support per person is 250 pounds with
the weight evenly distributed across the head and foot sections. This
product is not designed to support or lift this amount of weight in the
head or foot sections alone. NOTE: Exceeding the recommended weight
restrictions could damage your EASE
performance, you should enter and exit the EASE
or fully lowered position.
EASE ® fits easily inside bed frames, furniture beds and platform
beds that are certified to hold a minimum of 850 pounds. If using this
adjustable base without the legs and placing directly on a bed frame or
platform bed, cross-bed supports (slats) are strongly recommended to
ensure EASE maintains stability during operation.
®
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
Acoustics:
In normal base operation the wheels, which allow the bed to maintain
its distance from the wall, will make contact with the steel platform
supports of the base creating a contact noise. When entering, exiting
or shifting weight on the base, this contact noise may be audible as the
wheels make contact. This is normal.
2
® are: Twin / Twin Long /
® and void your warranty. For best
® while it is in the flat
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight whenever
possible. For spot cleaning, wipe area with a light damp sponge or
vacuum with a soft brush attachment to remove particles. Keep at a
minimum of 30cm (12 inches) away from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth. Wipe with
a clean cloth dampened with warm water. Do not wet excessively. A soft
bristle brush may be used to remove ingrained soil. Avoid scratching by
gentle brushing. Wipe with a clean cloth dampened with warm water to
remove residues after brushing. Dry in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional
advice.
SAVE THESE INSTRUCTIONS.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF
exposure requirements and void user's authority to operate the device.
Radio Frequency: 2.4 GHz
CAN ICES-3 (B)/NMB-3(B)