Initial Setup - BRAX NOX4 DSP Instruction Manual

INITIAL SETUP

In order to maintain the quality of this product and to ensure safe operation, we strongly recommend that our am-
will qualify you for our special lifetime warranty. Your BRAX-dealer will also assist you in selecting the correct
additional components and in ensuring that proper consideration is given to all the safety and sound related
aspects.
We guarantee that this product has been checked for proper functioning before shipping. Before you start installation, dis-
connect the car battery at the minus pole. Once again we would like to urge you to have the installation work carried out by
by AUDIOTEC FISCHER Germany.
controls.
screws screwed into a mounting surface. Before drilling the holes for the screws, carefully examine the area around the
installation position and make sure that there are no electrical cables or components, hydraulic brake lines or any part of
the petrol tank located behind the mounting surface - otherwise these could be damaged. You should be aware of the fact
that such components may also be concealed in the double-skin trim panels/mouldings.
The positive lead from the
battery for the complete system should be provided with a line fuse at a distance of max. 30 cm from the battery. The am-
perage rating of the fuse is calculated from the maximum total current input of the car/vehicle audio system.
22