Updating The Dsp Operating Software - BRAX NOX4 DSP Instruction Manual

Updating the DSP operating software

The NOX4 DSP offers the option of installing the DSP operating software either via the USB-Port or via the MicroSD card
the DSP PC-Tool application it checks automatically if the DSP operating software is up-to-date. In case of an out-of-date
operating software the DSP PC-Tool offers an automatic update, which can be started directly. If you are not updating the
DSP operating software, these version of the DSP PC-Tool can not be used.
We recommend to use always the latest software revision of the DSP PC-Tool application. These can be downloaded at
or
restored. We recommend cutting the volume before updating so that no acoustic signals are audible until the DSP
Updating the NOX4 DSP operating software:
1. Please check if you are already using the lastest version of the DSP PC-Tool software. The software can be down-
2. Afterwards launch the DSP PC-Tool and press the „Connect"-Button. If the DSP needs an operating software update,
the DSP PC-Tool will prompt you to update it. When you press the „OK"-Button the DSP operating software will be
the update these DSP PC-Tool version will not work with the installed DSP operating software.
3.
made before are deleted and the factory settings are restored.
4.
rating software and the new DSP PC-Tool
(US).
-
27