BRAX NOX4 DSP Instruction Manual page 10

10 Control pushbutton & Status-LED
Status-LED.
Attention: After erasing the setups from memory the NOX4 DSP will not reproduce any audio output.
The Status-LED indicates the current active DSP-setup. Green means that setup 1 (af1) is loaded, orange means
2. A connection to a computer is established 3. An upload via a MicroSD card is in progress
11 Signal inputs
tion. The appropriate signal input must be routed to both output channels (channel „A & B" or „C & D"). We recommend to
12 Control Input
This multifunctional input is used to connect DSP accessories, like a level remote control or a bluetooth module.
13 Optical Input
Optical input in SPDIF format for connection to signal sources with a digital audio output. The sampling rate of this input
must be between 6 and 192 kHz. The input signal is automatically adjusted to the internal sampling rate.
14 Signal outputs channel E and F
via the PC-Tool software as at the internal channels. The output voltage is max. 6 Volts RMS.
-
25