Adjusting The Input Sensitivity - BRAX NOX4 DSP Instruction Manual

ADJUSTING THE INPUT SENSITIVITY

Fig. 1:
Control panel for
adjusting the input
sensitivity
1 Pushbutton for increasing the input sensitivity
2 Pushbutton for decreasing the input sensitivity
screw key. Under this plate are the pushbuttons for precise and easy adjustment of the input sensitivity. Each channel can
1 Pushbutton for increasing the input sensitivity
With this control the input sensitivity of each channel can be increased stepwise.
2 Pushbutton for decreasing the input sensitivity
With this control the input sensitivity of each channel can be decreased stepwise.
The red shining LEDs indicate the adjusted input sensitivity. Please take care that the input sensitivity in bridged mode is
set up equally.
28
1 1
2 2
3
Fig. 2:
Control panel with ad-
justed input sensitivity
to 4 Volts
3
LED-indicator shows the adjusted input sen-
sitivity
-