Getting Started; Setting The Time; Setting The Alarm - Bellman & Symfon Alarm clock Pro User Manual

Alarm clock Pro

Getting started

1
Pull the battery tab on the bottom of the
alarm clock.
2
Connect the bed shaker on the back of the
alarm clock.
3
Connect the power supply to the alarm clock
and the mains outlet.
4
Tuck the bed shaker under the pillow or
mattress and place the alarm clock on the
bedside table.

Setting the time

Press the left dial and turn it to set hours.
To set minutes, press and turn the dial again.
Press once again to save your settings.
Activating the alarm
Press the alarm on/off button to activate the alarm.
The alarm indicator lights up in red. To turn off the
alarm, press the button again.
1

Setting the alarm

Press the right dial and turn it to set hours.
To set minutes, press and turn the dial again.
Press once again to save your settings.
Using the snooze and night light
Press the snooze button briefly to snooze the alarm.
Press and hold the snooze button for 3 seconds to turn
on the night light. Press the button again to turn it off.
2
3
The appearance may
differ with territory