TDK-Lambda HFE1600 User Manual page 9

Safety Approvals
1. Specification
Applicable safety standards IEC/EN/UL 60950-1
Withstand voltage
2. Safety Approvals
UL 60950-1 and CSA22.2 No.60950-1 - UL Recognized. C-UL for Canada.
IEC 60950-1 - CB Report and Certificate.
EN 60950-1 - CE mark.
Marking by the CE Symbol indicates compliance to the Low Voltage Directive of the
European Union.
A "Declaration of Conformity" in accordance with the preceding directives and standards
has been made and is on file at our EU representative TDK LAMBDA UK, located at Kingsley
Avenue, Ilfracombe, Devon EX34 8ES, UK. A "Declaration of Conformity" may be accessed
via company website www.uk.tdk-lambda.com/technical-data
SAFETY INSTRUCTIONS
CAUTION: The following safety precaution must be observed during all phases of operation,
service and repair of this equipment. Failure to comply with the safety precautions or warnings
in this document violates safety standards of design, manufacture and intended use of this
equipment and may impair the built-in protections within. TDK Lambda shall not be liable
for user's failure to comply with these requirements.
CAUTION: HFE1600/2500-LAN unit is not authorized for use as critical component in nuclear
control systems, life support systems or equipment for use in hazardous environments without
the express written approval of the managing director of TDK-Lambda.
ENVIRONMENTAL CONDITIONS
HFE1600/2500-LAN unit intended for use under following environments:
*Indoor use
* Pollution degree 2
* Max. operational altitude: 3000m above sea level
*Ambient temperature: -10°C ~ +70°C.
PARTS SUBSTITUTIONS & MODIFICATIONS
Parts substitutions and modifications are authorized TDK Lambda service personnel only.
For repairs or modifications, the instrument must be returned to TDK Lambda service facility.
I/O connector AC pins C2, C3 -
Ground
I/O connector AC pins C2, C3 - LAN/
Rear connector
LAN/Rear connector - Ground
9
2000VAC/2828VDC
3000VAC/4242VDC
500VAC/707VDC