Application Menu - Tree LCT3 Operation Manual

The balance is fitted with one bubble level, and adjustable feet for level-control that
allow for small height differences or any unevenness in the surface on which the
balance is placed.
The screw feet must be adjusted so that the air bubble is precisely in the center of the
sight glass of the bubble level (see Fig. 3.2)
Place the scale horizontally and keep the bubble inside the bubble level aligned with the
circle (Fig.3.2). In order to get exact measurements, the balance must be carefully
leveled after each re-location.
Fig. 3.2 correct leveling with the aid of the bubble level
Display messages & Key functions
Display messages:
 The weight display indicates the gross or net weight on the weighing pan.
 The unit weight display indicates the average or set unit piece weight.
 The total display is the accumulated total pieces on the weighing scale.
 The low sample Indicator activates when the sample number is not significant
enough to allow an accurate counting.
 The low piece weight indicator activates when the sample unit weight is not
significant enough for an accurate counting.
Rev 3, 5.30.17

Application Menu

LCT SERIES Operation Manual
13