Presenter Track; About Presenter Tracking - Cisco TelePresence Touch 10 User Manual

Camera

Presenter Track

1
To enable Presenter Tracking, tap Camera, in
the upper right corner.
3
Tap anywhere outside the menu to exit.
To deactivate Presenter Track, press the preset
again.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Systems with PresenterTrack enabled will
have this as a camera preset, as shown.
Be aware that camera presets will not be
accessible if Speaker Tracking has been
activated (see the previous page for more on
this).

About Presenter Tracking

Systems with SpeakerTrack may
include the Presenter preset.
This preset must have been
implemented by your video support
team to work.
PresenterTrack enables the camera
to zoom in and track a presenter
who is moving about the stage
presenting. The stage zone will have
been defined by your video support
team.
Once the presenter leaves the stage
the tracking is brought to a hault.
The procedure for setting this up
and the products supporting this
feature can be found in the CE9.2
Administrator Guide for our room
systems and codecs.
37