Troubleshooting - Samsung SMT-W6100 User Manual

TROUBLESHOOTING

Possible problems and troubleshooting steps for your phone are described below.
Check the troubleshooting steps before contacting your Authorized Samsung Reseller.
The LCD does not light up.
Battery is discharged. Recharge the battery and turn the phone on again.
The bell does not ring or the ring sound is too small.
- Check if the phone is set to Quiet Mode.
- Adjust the volume using the Volume key.
- Check if VIP filter or Private no. filter is enabled.
The battery is not discharged but the phone does not turn on.
- Take the battery out and put it in again, and turn the phone on.
- Take the battery out, clean the charging terminals of the battery. Then put the battery back in,
and turn the phone on.
140