Omron NX-AD series User Manual page 77

Applicable Wires
The wires that you can connect to the screwless clamping terminal block are twisted wires, solid wires,
and ferrules that are attached to the twisted wires. The following section describes the dimensions and
processed methods for applicable wires.
Dimensions of Wires Connected to the Terminal Block
The dimensions of wires that you can connect into the terminal holes of the screwless clamping ter-
minal block are as in the figure below.
Process the applicable wires that are specified in the following description to apply the dimensions.
2.4 mm max. (Terminals other than ground terminals)
2.7 mm max. (Ground terminals)
NX-series Analog I/O Units User's Manual for Analog Input Units and Analog Output Units (W522)
1.6 mm max. (Terminals other than ground terminals)
2.0 mm max. (Ground terminals)
4 Installation and Wiring
4
4 - 13