FingerTec R3 Quick Start Manual

R3 Q2i
Quick Start Guide
1
Setting the Date and Time


Press Menu, select Date/Time

Insert the current date and time and press
2
Enrolling Fingerprints


Press Menu, go to User Manage

Key in a User ID, select Enroll FP
times, according to the instructions.

Press OK to save then press ESC. Press
return to the main screen.
3
Enrolling Cards


Press Menu, go to User Manage

Key in a User ID, select Enroll

Wave the card until the Card ID
and Esc to return to the main screen.
i-Kiosk 100 Plus
under Systems.
OK to save.
and select New User.
and place the finger on the scanner 3
OK again, and then ESC again to
and select New User.
Card.
is displayed on screen. Press OK to save
The Quick Start Guide is intended to provide the user with simple instructions on how to
setup the terminal date/time and communication as well as to perform fingerprint and
card enrollment and verification. For more details on other topics of terminal management,
refer to the terminal's hardware user manual available in the package or online at
• i-Kiosk 100 Plus: http://info.fingertec.com/ikiosk100p-4
• Q2i: http://info.fingertec.com/q2i-4
• R3: http://info.fingertec.com/r3-4
© 2014 Timetec Computing Sdn Bhd. All rights reserved.• 102014
4
Communication Settings
Press Menu > COMM > Network > Set value
for IP/Subnet mask/Gateway > OK (Save) >
Security > Device ID > Set 0 > OK (Save) >
ESC to return to main screen > Restart to
apply changes.
Terminal Overview • R3
LCD Screen
Keypad
L.E.D Display
Fingerprint
Sensor
RFID Card
Induction Area
Default set value:
IP address - 192.168.1.201
Subnet mask - 255.255.255.0
Gateway - 192.168.1.1
Dev ID - 1
Password - 0
USB Port
Reset Button
M/OK
Button
Speaker