Time Setup - Vega INFO-1 Operating Manual

G-force meter utc and local time display slip indicator battery voltage, *current and charge display oat display flight timer & flight log stopwatch countdown timer alarm

Hide thumbs

Table Of Contents

Table of Contents

Vega INFO-1 Operating Manual

4.4 Time Setup

Set UTC Time:

UTC Offset:

Enter the UTC offset for your location. The UTC offset can be adjust in half an hour increments.

UTC Display:

Select to enable or disable the UTC display.

SW Display:

Select to enable or disable the stop watch display.

TMR Display:

Select to enable or disable the countdown timer display.

ALM Display:

Select to enable or disable the alarm display.

RTC Trim:

This allows you to adjust a trimming factor that will increase the accuracy of the built in clock.

This function is used to set the internal real time clock. The time to be entered must be

UTC in order for the system to operate correctly. Do not enter local time (unless it is the

same as UTC).

UTC is the same as Greenwich Mean Time (GMT) or Zulu time.

Page 13

Table of Contents

Time Setup - Vega INFO-1 Operating Manual

4.4 Time Setup

Related Manuals for Vega INFO-1

Related Content for Vega INFO-1

Table of Contents