Assembly Tools/Tools Req'd For Boiler Assembly 5 - Buderus G315 Assembly, Maintenance And Operating Instruction

Assembly Tools/Tools Req'd for Boiler Assembly 5

Assembly tools and auxiliary assembly materials
Boiler assembly tool rods size 2.2 (2 pieces)
Wooden or rubber mallet
Half-round rough file
Flat head and Phillips screwdrivers
Flat chisel, steel strips for boiler support
Metric wrenches sizes 13, 19, 24, 36 and socket
size 19 (US equivalent sizes may also be used)
Cleaning rags, machine oil, gasoline or paint
thinner, level, steel wire brush, tape measure,
chalk.
Boiler assembly tool components
Tightening Nut
Pressure
Bearing
Pressure
Bearing
Fig. 5
Table 4. Assembly tool requirements
No. of Sections
5-9
Assembly Tool
85"
Stop
Small
Pressure
Flange
Flanges
Assembly Tool
1
Straight Pin
Extension Piece Total Tool Length (ft)
0 7
7