Buderus G315 Assembly, Maintenance And Operating Instruction page 17

9 Installation of Insulation & Boiler Jacket Panels
Location of support brackets for jacket panels
• Loosen the first nut from the upper front tie bar.
• Position the upper front support bracket between
the first and second nut. Point the folded edge of
the bracket forward (Fig. 25).
• Place the rear support bracket on the back
section and secure with M8x15 bolts. Point the
folded edge of the bracket forward (Fig. 26).
Insulation blanket
The insulation blanket consists of 1 piece with length "L"
varying with boiler model.
No. of Sections Length "L"
5
6 39
7 45
8
9 58
16
33
1 /2
1 /2
52
1 /4
Front support
brackets
Fig. 25
Rear support
brackets
Fig. 26
L
Fig. 27
111"
front
rear