Siemens FT2080 Mounting & Installation page 13

Building Technologies
Fire Safety
1. Wire up the flat cable from the fire terminal board X3 to the PMI & mainboard
X3.
2. Wire up the prefabricated cable of the supply from the EMC filter to the fire
terminal board X7.
3. Wire up the external cables of the supply, the FCnet and the Ethernet cable
through the cut-out in the desktop and the cable lead-throughs in the rear
panel.
Installing the fire terminal (Touch)
7
8
9
Installing the fire terminal (Touch) in the rear panel (Touch)
1 Fire terminal (Touch) FT2080
2 4x fixing screw
3 4x mounting hole in the fire terminal (Touch)
4 Cable lead-through in the rear panel
5 4x threaded hole in the rear panel (FT2080)
6 Lateral cable lead-throughs
7 Rear panel (FT2080) FHA2039
8 Cut-out in the desktop
9 Desktop
Installation in rear panel (FT2080) FHA2039
1
4
2
3
4
5
6
13
A6V10462660_en--_a
2015-09-10