Siemens FT2080 Mounting & Installation page 14

4 Installation in rear panel (FT2080) FHA2039
14
Building Technologies
Fire Safety
1. Position the wired-up fire terminal (Touch) (1) on the rear panel (7) as shown.
2. Screw the four fixing screws (2) through the holes (3) to secure the fire terminal
(Touch) (1) into the threaded holes (5) in the rear panel.
Installing the rear panel (FT2080) in a desktop
7
6
Installing the rear panel (FT2080) in a desktop
1 Rear panel (FT2080) FHA2039
2 Mounted fire terminal (Touch) FT2080
3 4x fixing screw
4 Mounting holes in the flanges of the rear panel (FT2080)
5 Bores in the desktop
6 Desktop
7 Cutout for rear panel (FT2080) min. 430 x 268 mm
1. Place the rear panel (1) in the cut-out of the desktop (6) as shown. Ensure that
the cables are not pinched.
2. Use the four fixing screws (3) to screw the rear panel (1) into the bores (5) of
the desktop at the flanges (4).
2
1
3
4
5
A6V10462660_en--_a
2015-09-10