Buffalo TeraStation Setup Manual page 38

• Using in RAID 10 mode
1
Change system to normal mode (page 34).
2
3
4
5
Note:
Building the RAID array will take approximately 10 hours per TB. File transfers will be slower during this period.
While the "RAID ARRAY x Resyncing" message is displayed on the LCD screen, do not turn off the TeraStation. If
you turn it off, the configuration process will start over.
6
The confirm operation screen will appear. Enter the number shown in the [Confirmation Number] field within 60
seconds, and click [Apply].
7
Follow the instructions displayed on the screen.
You have now set up a RAID 10 array. Turn to page 16 to create a shared folder.
TeraStation Setup Manual
Click [System] - [Storage] - [RAID Array] in the Web Admin.
Click the array you want to configure.
Select hard drives (all 4 of them) to use in RAID10.
1 Select [RAID 10].
2 Click [Create Raid Array].
37