Novatel Europak 3 Quick Start Manual

EuroPak™- 3/3T
QUICK START GUIDE
This guide provides the
basic information you need
to setup and begin using
your new EuroPak. More
detailed information on the
installation and operation of
your receiver, may be found
in the user manuals
provided on the accompa-
nying CD. The most up to date revisions of these manuals can
be found on our website at http://www.novatel.com/support/firm-
ware-software-and-manuals/.
BOX CONTENTS
In addition to this Quick Start Guide, the following is provided:
• 1 12V power adapter cable
• 2 DB-9 serial cables (1 straight through, 1 null modem)
• 1 I/O cable
• 1 CD containing:
• An installation program for NovAtel's Aviation PC
utilities, including GPSolution
® (CRR Version)
• Product documentation, including user manuals
ADDITIONAL EQUIPMENT REQUIRED
The additional equipment below is needed for a basic setup:
• A Windows-based PC or laptop with an RS-232 DB-9 port
• A standard 12 VDC power outlet, or a 9-18 VDC power
supply, and a power cable with a 4-pin LEMO plug (LEMO
part number FGG.0B.304.CLAD52Z) at the receiver end
• A quality GPS antenna, like the GPS-702 from NovAtel
1. If an alternative power source is preferred, the automobile power
adapter can be cut off from the power cable. The exposed wires (red
and orange for positive, brown and black for negative) can then be
tied to a supply capable of at least 5 W. The use of a 3 A slow-blow
fuse is recommended.
• A coaxial cable with a TNC male connector at the receiver
end, such as NovAtel's C016 model
SETTING UP YOUR EUROPAK
Complete the steps below to connect and power your EuroPak.
1. Mount the antenna to a secure, stable structure with an
unobstructed view of the sky.
2. Connect the antenna to the receiver's GPS
high-quality coaxial cable.
3. Connect COM1 on the receiver to a DB-9 serial port on your
PC or laptop using the null modem cable provided.
1
4. Line up the red mark on the power cable's connector with
the red mark on the receiver's PWR connector. Insert the
power cable connector in the PWR port.
port using
5. Plug in the adapter and/or connect and turn on the power
supply. The LED above the PWR port glows red when the
EuroPak is properly powered.
INSTALLING THE PC UTILITIES
Once the EuroPak is connected to the PC, antenna, and power
supply, install NovAtel's Aviation PC Utilities
1. Start up the PC.
2. Insert the accompanying CD in the CD-ROM drive of the PC.
3. Select Install the Aviation PC Utilities from the window that is
automatically displayed. If the window does not automati-
cally open when the CD is inserted, select Run from the
Start menu and select the Browse button to locate Setup.exe
on the CD drive.
4. Install the PC utilities by advancing through the steps pro-
vided in the NovAtel Aviation PC Utilities setup utility.
ESTABLISHING COMMUNICATION WITH THE RECEIVER
To open a serial port to communicate with the receiver, complete
the following.
1. Launch GPSolution from the Start menu folder specified dur-
ing the installation process. The default location is Start |
Programs | OEM4 PC Software | gpsolution4 -crr.
You must use GPSolution4 -CRR. The OEM4 version of
GPSolution does not work with the EuroPak receiver.
2. Open the Device menu and select Open...
3. Select the New... button in the Open dialog box.
.
4. Enter a name for the new device configuration in the Name
field of the New Config dialog box.
5. Select the Settings button.
6. Select the PC serial port the EuroPak is connected to from
the PC Port drop-down list.
7. Select 115200 from the Baud Rate list.