System Components - Sony XCL-CG510 Technical Manual

System Components

Video Camera Module
Camera module interface
board
Camera Link cable
(Sony Camera-compatible)
Camera cable
CCXC-12P02N (2 m, 6.6 ft)
CCXC-12P05N (5 m, 16.4 ft)
CCXC-12P10N (10 m, 32.8 ft)
CCXC-12P25N (25 m, 82 ft)
Install the board in a PCI/PCI-Express slot in devices such as a computer. Select a
commercially available interface board compatible with the Camera Link feature. You can use
either a board that supports PoCL, or one that does not.
Due to the performance of the board, the frame rate may become low according to lack of
processing capacity. To have this product output frames at the highest speed, use a board
corresponding to PCI-Express.
Performance may also be dependent on the host device (e.g., Computer), so consult the
dealer if images are not displayed properly.
This cable connects to the DIGITAL Interface connector on the rear panel of the camera
module. Image/control signals are transmitted via this cable.
If there is support for PoCL, power is also supplied at the same time.
If you use a camera module interface board with support for PoCL, be sure to use a camera
link cable with support for PoCL.
Spotted noise may appear in a specific brightness in the window according to the attribute of
the cable. If this noise is an obstacle, use a shorter cable.
C-mount lens Camera adaptor
Use a lens appropriate DC-700/700CE
for the pixel count of
the camera.
5
Tripod adaptor
VCT-333I (Insulated type)