Specifications - Sony XCL-CG510 Technical Manual

Specifications

Specifications
Pickup device CMOS image sensors with a global
shutter function
2/3 type
Standard video output size (horizontal/vertical)
2,448 × 2,048
Frame rate 28 fps (2tap)
35 fps (3tap)
Lens mount C-mount
Flange focal length
17.526 mm
Video output signal
XCL-CG510:
Mono 8 bits (default setting)/10 bits/
12 bits
XCL-CG510C:
Raw 8 bits (default setting)/10 bits/
12 bits, RGB
Reference video output level
235 steps (8 bits)/3,760 steps (12 bits)
Reference pedestal level
15 steps (8 bits)/240 steps (12 bits)
Minimum illumination
XCL-CG510:
0.5 lx (gain control at +18 dB, F1.4,
shutter speed at 1/30 sec)
XCL-CG510C:
12 lx (gain control at +18 dB, F1.4,
shutter speed at 1/30 sec)
Sensitivity XCL-CG510:
F5.6 (gain control at 0 dB, 400 lx,
shutter speed at 1/30 sec)
XCL-CG510C:
F5.6 (gain control at 0 dB, 2,000 lx,
shutter speed at 1/30 sec)
Gain 0 dB to 18 dB, Auto gain
Shutter speed 1/100,000 sec to 60 sec, automatic
shutter
γ=1 (Changeable by LUT)
Gamma
Binning XCL-CG510:
2×1, 1×2, 2×2
XCL-CG510C:
Not included
External trigger pulse condition
pulse width: Between 10 µs and 2 s
amplitude: DC 2 V to 24 V (DC power
input connector)
External power DC 12 V (10.5 V to 15 V: DC power
input connector/10 V to 13 V:
DIGITAL Interface connector)
Power consumption (DC 12 V input)
2.7 W
Usable cable length (DIGITAL Interface cable)
10 m (at BASE-CLOCK 45 MHz),
7 m (at BASE-CLOCK 75 MHz)
(Cable length may vary depending on the used camera
link cable or image input board for the camera.)
Performance guarantee temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating temperature
–5 °C to +45 °C (23 °F to 113 °F)
Storage temperature
–30 °C to +60 °C (–22 °F to 140 °F)
Operating relative humidity
20% to 80% (no condensation)
Storage relative humidity
20% to 95% (no condensation)
MTBF About 9.3 years
Vibration resistance
10 G (20 Hz to 200 Hz)
Shock resistance
70 G
External dimension (w/h/d)
29 × 29 × 30 mm (1
3
1 /
16
Mass About 53 g (1.9 oz)
Accessories Lens mount cap (1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
IMPORTANT
The nameplate is located on the bottom.
43
3 3
/ × 1 /
16 16
inches) (excluding protrusions)
×