System Requirements - Sony Cyber-shot DSC-HX400 Instruction Manual

• If the software PMB (Picture Motion Browser), supplied with models released
before 2011, has already been installed on your computer, PlayMemories Home
will overwrite it during the installation. Use PlayMemories Home, the successor
software of PMB.
x

System requirements

You can find the system requirements for the software at the following URL:
www.sony.net/pcenv/
x Installing PlayMemories Home on a computer
1
Using the Internet browser on your computer, go to the
following URL, and then install PlayMemories Home.
www.sony.net/pm/
• For details on PlayMemories Home, refer to the following
PlayMemories Home support page (English only):
http://www.sony.co.jp/pmh-se/
• When installation is complete, PlayMemories Home starts.
2
Connect the camera to your computer using the micro
USB cable (supplied).
• Turn on the camera.
• New functions may be installed in PlayMemories Home. Connect the
camera to your computer even if PlayMemories Home is already
installed on your computer.
Notes
• Do not disconnect the micro USB cable (supplied) from the camera while the
operating screen or the accessing screen is displayed. Doing so may damage the
data.
• To disconnect the camera from the computer, click
(disconnect icon). For Windows Vista, click
GB
28
on the tasktray, then click
on the tasktray.