BKI LGF Service Manual page 23

Gas Pressure Fryer
STEP
1 Press the FILTER/OFF/FRY
switch to FRY.
2 Press PROG on the keypad.
3 Input 1724 and press ENTER.
4 Select the program product
number (1-8).
5 Press ENTER.
6 Press TOGGLE/CLEAR and
input the number of minutes you
want to cook.
7 Press ENTER.
8 Press TOGGLE/CLEAR and
input the cooking temperature for
product to be cooked.
9 Press ENTER.
10 Press TOGGLE/CLEAR until the
desired option is displayed.
11 Press ENTER.
12 Press TOGGLE/CLEAR until the
desired option is displayed.
Table 2. Product Programming Procedure
ACTION DISPLAY
LOW
PROGRAM CODE
PROGRAM PRODUCT #
PROGRAM PRODUCT X
PROGRAM TIME1
00:00
PROGRAM TIME1
XX:XX
PROGRAM TEMP1
000 °F
PROGRAM TEMP1
XXX °F
PROGRAM TEMPCOM1
FLEX TIME
PROGRAM TEMPCOM1
PROGRAM VALVE1
CLOSED
PROGRAM VALVE1
21
COMMENTS
X refers to the program number
you selected.
This command allows you to
specify the cooking time for this
stage. The time displayed may be
a previously programmed value.
XX:XX refers to the number of
minutes you input.
This command allows you to
specify the cooking temperature for
this stage. The temperature
displayed may be a previously
programmed temperature. The
temperature scale may also display
°C depending on the system option
that is set.
XXX refers to the cooking
temperature you input.
This command enables you to
select whether or not time is
allowed for the fryer to recover
from temperature loss while
cooking during this stage. The
FLEX TIME option will allow the
fryer to recover from temperature
loss.
X refers to the temperature
X compensation option selected.
This command allows you to
specify whether the solenoid valve
will be open or closed during this
stage.
X refers to the solenoid valve
X option selected. OPEN is used for
Models ALF and BLF Automatic
Lift fryers. If your program requires
the solenoid valve to be closed
while cooking, choose the
CLOSED option.
Operation