Digitus DS-46100 User Manual

VIDEO
SELECTOR
U M
SER ANUAL
DS-46100

Package contents -

 1 DS-46100 Video Selector
 1 DC 9V 1A Power Adapter
 1 Remote Controller
 1 User Manual
Anything missed, please contact your dealer.
Features
 Resolution up to 1920x1440.
 Pixel frequency up to 250MHz.
 Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB
(only on line CPU port).
 Remote controller for operation.
 OSD function for easy check.
 Auto scan function to monitor PC operation.
 Hot pluggable.
 Auto skip over the PC power off, suspend & VGA
cable unplug.
Specification
Function
CPU HD-15 Female
Connectors Monitor HD-15
LED
Remote Controller Operation
OSD Function
VGA Resolution
Power Adapter (Min.)
Scan Interval
Case
Dimension (LxWxH)
Weight
Hardware Required
Monitor (Projector)
The VGA, SVGA, multi-sync monitor, projector or
PLASMA Monitor is capable of the highest resolution.
PC
Inserted with a VGA, SVGA or multi-sync card.
(DS-46100)
Cable
Standard cable.
Introduction
Front View
1. Port Selection Switch
Switch to the next computer by pressing this button.
2. Port LEDs
 The red LEDs flash back and forth after power
supply well connect with video selector.
 The green on line LED lights while the computer
has well connected with the corresponding port &
is running.
 The red LED lights on corresponding port while
the computer has been successfully selected.
3. IR Receiver
Take aim at IR receiver with remote controller.
DS-46100
8
1
Female
On-Line 8
Selected 8
√
√
1920x1440, 250MHz
DC9V 1A
5~30 seconds
Metal
200x75x45 mm
420g
Rear View
1. Power Supply
Plug DC9V 1A power adapter here.
2. Video Connector
Plug the monitor cable here.
3. CPU Port Connectors
Plug the extension cables of VGA port on each
computer here which are designated as computer
(1,2,3,4,5,6,7,8).
The individual port is designated with a specific icon.
Remote Controller
1. Power on/off: Turn video selector on/off.
2. OSD on/off: Enable/disable OSD function.
3. Audio on/off: Reserved.
4. Scan on/off: Enable/disable auto-scan function.
Auto-scan time can be increased progressively from
every 5 seconds to 30 seconds by pressing up arrow.
Conversely, pressing down-arrow makes the time
decreased from 30 seconds to 5 seconds.
While auto scan function is applied, port selection
keys don't work.