Fail Over - LG 32SE3D Owner's Manual

22

Fail Over

This feature enables automatic switching to another input signal when there is no signal from the current input.
Installation Menu (V 3.0)
LG Digital Signage Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
Lock Mode
External Speaker
Fail Over
Fail Over
ISM Method
Easy Brightness Control
S/W : xx.xx.xx.xx Micom : x.xx.x
You can set Mode to Off, Auto, or Manual.
Off: Fail Over is disabled.
y y
Auto: If there is no signal from the current input, the product input switches to a different input that has a
y y
video signal following a specified order (*see table).
Manual: You can set switching priorities for inputs when there is no signal. If there are a multiple video signals,
y y
the current input switches to the input with the highest priority.
You can set USB to Off, Movie, or Photo.
Off: Fail Over USB is disabled.
y y
Movie: If you set this feature to Auto, a movie is played back when there is no input signal. If you set this fea-
y y
ture to Manual, a movie is played back when there is no signal from any of the prioritized inputs.
Photo: If you set this feature to Auto, a photo slideshow is played back when there is no input signal. If you set
y y
this feature to Manual, a photo slideshow is played back when there is no signal from any of the priori-
tized inputs.
Fail Over priority when set to Auto
Current source 1st change
RGB
HDMI
DVI-D HDMI
HDMI DVI-D
OPS
HDMI
Fail Over
Mode
USB
Priority1
Priority2
Priority3
Priority4
OK
2nd change 3rd change
DVI-D
OPS
OPS
DVI-D
Off
Off
-----
-----
-----
-----
Previous
4th change
OPS USB Auto play
RGB USB Auto play
RGB USB Auto play
RGB USB Auto play
OK
5th change
RGB NO SIGNAL
DVI NO SIGNAL
HDMI NO SIGNAL
OPS NO SIGNAL