LG 32SE3D Owner's Manual page 95

8
Tips for using USB storage devices
Only a USB storage device is recognizable.
y
If the USB storage device is connected through
y
a USB hub, the device is not recognizable.
y A USB storage device using an automatic rec-
ognition program may not be recognized.
A USB storage device which uses its own driver
y
will not be recognized.
The recognition speed of a USB storage device
y
may depend on each device.
Please do not turn off the display or unplug
y
the USB device when the connected USB stor-
age device is working. When such a device is
suddenly separated or unplugged, the stored
files or the USB storage device may be dam-
aged.
Please do not connect the USB storage device
y
which was artificially maneuvered on the PC.
The device may cause the product to malfunc-
tion. Only use a USB storage device which has
normal music files, image files
or movie files.
Please only use USB storage devices formatted
y
using the FAT32 file system. Storage devices
formatted with utility programs that are not
supported by Windows may not be recog-
nized.
Please connect power to a USB storage device
y
(over 0.5 A) which requires an external power
supply. If not, the device may not be recog-
nized.
Please connect a USB storage device with the
y
cable included by the device maker.
Some USB storage devices may not be sup-
y
ported or operate smoothly.
File alignment method of USB storage devices
y
is similar to Window XP and the monitor can
recognize up to 100 English characters.
Be sure to back up important files since data
y
stored on a USB memory device may be dam-
aged. We will not be responsible for any data
loss.
If the USB HDD does not have an external
y
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
If your USB memory device has multiple parti-
y
tions, or if you use a USB multi-card reader,
you can use up to 4 partitions or USB memory
devices.
If a USB memory device is connected to a USB
y
multi-card reader, its volume data may not be
detected.
If the USB memory device does not work prop-
y
erly, disconnect and reconnect it.
How fast a USB memory device is detected
y
differs from device to device.
If the USB is connected in Standby Mode, that
y
drive will automatically be loaded when the
display is turned on.
The recommended capacity is 1 TB or less for
y
a USB external hard disk and 32 GB or less for
USB memory.
Any device with more than the recommended
y
capacity may not work properly.
If a USB external hard disk with a Energy Sav-
y
ing function does not work, turn the hard disk
off and on again to make it work properly.
USB storage devices below USB 2.0 are sup-
y
ported as well. But they may not work properly
with videos.
A maximum of 999 folders or files can be
y
recognized under one folder.
It is recommended you use a certified USB
y
storage device and cable. Otherwise, a USB
storage device may not be detected or a play-
back error may occur.
Only a USB memory device can be used to play
y
back the files distributed and stored by Super-
Sign Manager. A USB hard disk or multi-card
reader will not work.
Only an FAT 32 file formatted storage device
y
can play back the files distributed and stored
by SuperSign manager.
A USB 3.0 storage device may not work.
y
Data on some USB storage devices may be
y
damaged in a high temperature environment.
It is recommended that you avoid playing
y
contents using more than two USB ports
simultaneously.