LG 32SE3D Owner's Manual page 59

Signage Mode Operation
Enable or disable all Signage Mode Operation functions by setting the feature to Yes or No.
y y
If you set Signage Mode Operation to Yes, all Signage Mode functions are enabled.
y y
If you set Signage Mode Operation to No, all Signage Mode functions are disabled, and the product operates
y y
with its default settings.
(Depending on the model, this feature may not be supported.)
Power On Status
You can select the operating status of the monitor when the main power is turned on.
y y
You can choose PWR, STD, or LST.
y y
PWR sets the monitor status to On whenever the main power is turned on.
y y
STD sets the monitor status to Standby when the main power is turned on.
y y
LST sets the monitor status back to its previous status. As in Power Backup mode, if you turn off the main power
y y
while the monitor is turned on, the monitor status changes back to On. Also, if you turn off the main power
while the monitor is in standby mode, the monitor goes into standby mode.
(This feature may not be available with some models.)
Key Operation
This feature allows you to manage the usability and operation of the local/front keys and your remote control.
y y
It works according to the "IR Operation" settings.
(This feature may not be available with some models.)
IR Operation / Local Key Operation
This feature allows you to set how the product operates after receiving a signal from a LG remote control or
y y
local key. (0 - Normal, 1 - Use PWR Only, 2 - Block All)
Selecting 'Block All' blocks any signal coming from a LG remote control/local key. (Power On feature is avail-
y y
able.)
Selecting 'Use PWR Only' blocks any signal coming from a LG remote control/local key, except the Power button.
y y
Selecting 'Normal' enables signals from any LG remote control/local key to be received normally.
y y
There are keys that must be operated in 'Service mode' when 'Use PWR Only' or 'Block All' is selected: In-Start,
y y
In-Stop, Power-Only, ADJ, Installation Menu, P-Check, and S-Check.
(This feature may not be available with some models.)
NOTE
When all IR key signals or all local key signals are blocked, the "Power On Status" value switches to "PWR".
y y
Changing this value is not impossible to ensure the correct powering on operation. (To prevent mistakes by
the user)
Limited Mode
This feature allows you inhibit the operations of particular Signage functions. This feature works according to
y y
the 'Input Source Change' , 'Menu Display' , or 'OSD Display' settings.
(This feature may not be available with some models.)
Input Source Change
Enable or disable input source changes by setting this feature to Yes or No.
y y
If you set this feature to No (changes disabled), the INPUT key is disabled.
y y
If you set this feature to Yes (changes enabled), the input source can be changed.
y y
(This feature may not be available with some models.)
5