LG 32SE3D Owner's Manual page 60

6
Menu Display
Setting this feature to Yes will display the menu. Setting this feature to No will hide the menu.
y y
However, even if you have set this feature to No, you can easily open the Installation Menu by pressing and
y y
holding the Menu button for more than 5 seconds.
(This feature may not be available with some models.)
OSD Display
Enable or disable OSDs by setting this feature to Yes (displayed) or No (not displayed).
y y
If you set this feature to No (not displayed), OSDs other than Installation Menu are not displayed.
y y
(This feature may not be available with some models.)
Power On Default (Input Source, Video Setting, Aspect Ratio)
You can configure 'Input Source' , 'A/V Setting' , and 'Aspect Ratio' after the monitor is turned on.
y y
You can set this feature to Yes (enabled) or No (disabled).
y y
If you set 'Power On Default' to No, the settings for 'Input Source' , 'A/V Setting' , and 'Aspect Ratio' are not
y y
applied.
If you set 'Power On Default' to Yes, the settings for the menus above are applied.
y y
(This feature may not be available with some models.)
Input Source
This feature allows you to set whether to use a new input source or a pre-existing input source.
y y
Set 'Input Source' to Off to use the pre-existing input source.
y y
You can use any of the sources supported by the given model as the input source.
y y
If both 'Input Source' and 'On Time' have been set, 'Input Source' takes priority.
y y
(This feature may not be available with some models.)
A/V Settings
When your monitor is powered on, you can set certain video options.
y y
If you set this feature to Yes, the video settings configured before entering the Installation Menu are saved. In
y y
addition, even if you changed the video settings before turning off the monitor, the saved settings are restored
when you turn the monitor on again.
Saves video settings: Picture Mode, DPM Select, Smart Energy Saving, Backlight, Contrast, Brightness, Sharp-
y y
ness, Color, Tint, and Color Temp.
Saves audio settings: Sound Mode and Balance.
y y
(This feature may not be available with some models.)
Aspect Ratio
This feature allows you to set the screen aspect ratio applied to your monitor when turned on.
y y
Selecting 'Disable' sets the screen aspect ratio to 'Aspect Ratio' when the monitor is turned on.
y y
Selecting 'Set By Program' sets the screen aspect ratio to 'Set By Program' when the monitor is turned on.
y y
Selecting '4:3' sets the screen aspect ratio to '4:3' when the monitor is turned on.
y y
Selecting'16:9' sets the screen aspect ratio to '16:9' when the monitor is turned on.
y y
(This feature may not be available with some models.)