26
[Server Setting]
[Ez Setting]
Set up to connect your signage to a SuperSign server.
•
CMS Server
•
Control Server
•
LG Pro:Cloud Server
[Fail Over]
[Ez Setting]
Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the
set app.
•
[On/Off]: Turns [Fail Over] on or off.
•
[Input Priority]: Set the priority of input sources for fail over.
•
[Play Backup Content]: When there is no input signal, this feature automatically plays the content stored in the
device or runs the set app. When set to [On], [Auto Capture Images], [Media Storage],
[SuperSign Content], and [SI App/Play via URL] items are activated.
- [Auto Capture Images]: When the automatic input switches due to taking screenshots of an image or video
-> - Capture time Interval: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours.
- [Media Storage]: When the automatic input switches due to the image and video file being uploaded, the feature
will play back the file.
-> - [Backup media select]: Using the settings button, you can upload a single file in the internal / external memory.
-> - [Preview]: You can preview the uploaded file.
- [SuperSign Content]: When the automatic input switches, this feature will play the file(s) distributed in SuperSign
CMS.
- [SI App/Play via URL] Run SI App or Play via URL when automatic input switch occurs.
-> - [SI App]: SI App behavior depends on the settings from [SI SERVER SETTING] menu in [Ez Setting].
-> - [Play via URL]: Play via URL behavior depends on the settings from [Play via URL] menu in [Ez Setting].
-> - If both [Play via URL] and [SI SERVER SETTING] can be run, it runs [Play via URL] when automatic input switch
occurs.
•
[Reset]: Reset to initial settings.
NOTE
•
If multiple input devices are connected simultaneously, the input device switches automatically to the one with the
highest priority among the devices with valid signal, even if a failure does not occur.
[Server Setting]
[Fail Over]
that is playing at regular intervals, this feature will play back the file. (OLED model is not
supported.)