21. Align the positioning pins, then attach the prism stage with the two screws.
22. Remove the two hexagonal head bolts.
23. Slide the PRD-001/001S in the direction of the arrow B until it touches the portion A of the optical support.
24. Remove the PRD-001 in the direction of the arrow C.
PRD-001
SRX-R320
P4 x 10
Prism stage
Fig. 1-4-1j
Hexagonal
head bolt
C
Fig. 1-4-1k
Positioning
pins
B
Portion A
Optical support
1-19 (E)