Table of Contents
Advertisement
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware. At
first, please follow up sections 1.3, 2.1 and 2.2 in check the delivery
package and carefully unpacking. Following after, the jumpers setting of
switch, watchdog timer, and the DiskOnChip address selection.
2.1 Caution of Static Electricity
The CPU Card has been well package with an anti-static bag in protect
its sensitive computer components and circuitry from the damage of
static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against
the static electric discharge whenever you handle the board:
1. Please use a grounding wrist strap on whoever needs to handle the
CPU Card. Well clip the ALLIGATOR clip of the strap to the end of the
shielded wire lead from a grounded object. Please put on and connect
the strap before handles the CPU Card for harmlessly discharge any
static electricity through the strap.
2. Please use anti-static pad for put any components or parts or tools on
the pad whenever you work on them outside the computer. You may
also in use the anti-static bag instead the pad. Please ask from your
local supplier in help up your necessary parts on anti-static
requirement.
7
Advertisement
Table of Contents
