2.12 DiskOnChip Address Setting
All CPU Card provides a U10 socket for install the DiskOnChip
module.
A JP15 may select the starting memory address of the DiskOnChip
(D.O.C.) for avoid the mapping area with any other memory devices. If
you have another extra memory devices in the system with the same
memory, neither the CPU Card nor the extra memory devices will
function normally. Please setting both at different memory address
mapping.
JP15 : DiskOnChip Address
JP15
*1-2
3-4
*) : default setting
The D.O.C. function allows the system in using without FDD nor HDD.
The D.O.C. may formatting as driver C: or driver A:. User may also
easily uses the DOS's commands such as FORMAT, SYS, COPY,
XCOPY, DISCOPY and DISKCOMP etc. This is means that the D.O.C.
may uses as driver-A if the system without FDD-A for ambient
application. Please contact with your supplier for different size D.O.C.
module.
2.13 CPU Temperature Alarm
All CPU Card provides the feature of CPU temperature alarm. The
warning buzzer will alarm when the CPU's temperatures rise over to
55
±5
℃.
The warning buzzer will shout off automatically until the temperatures
goes under 55
±5
The JP25 provides for disable or enable the alarm function.
JP25 : CPU Temperature Alarm Control
18
Address
D000
D800
℃.