Table of Contents
Advertisement
Chapter-1
General Information
This is a common manual of HS-5200, HS-5200P, HS-5000 and HS-5000P
series Industrial Single Board CPU Card. The descriptions herein are subject to
HS-5200. The HS-5200P, which is based on HS-5200 but without VGA
CRT-LCD, supports. The HS-5000 is based on HS-5200 but supports with ISA
bus which without PCI interface at slot. The HS-5000P, which is based on
HS-5000 but without VGA CRT-LCD supports.
The HS-5200/5000 is a PISA/ISA bus Industrial Single Board (I.S.B.) CPU card
with features combine together to make it an ideal all-in-one industrial single
board computer, enhanced I/O effects, VGA and support panel functions and
make it an excellent choice for display-intensive applications. Various panel of
LCD types support including TFT, monochrome STN, EL and many others. The
HS-5200/5000 also provides a 10-pin header internal VGA connector for monitor
built-in system. The HS-5200 supports BEDO, EDO and FPM DRAM sockets.
This gives you the flexibility of configuring your system from 1 to 128 MB DRAM
by using the most economical SIMMs. It also provides two 72-pin SIMM sockets
for its on-board system DRAM.
The advanced PISA bus add-on connection of HS-5200/5000 allows user could
easily obtain both ISA's 16-bit and PCI's 32-bit full set signals from a small 16-bit
PISA slot for suitable plug into a small size system with 8/16/32-bit operating. A
single Flash chip holds the system BIOS, and you can change the Flash BIOS by
the Utility Update. Advanced USB and IR ports also provide a faster data
transmission.
The HS-5200/5000 features include a temperature-warning sensor installed
under the CPU socket. The sensor monitors the CPU temperature and generates
a warning buzzer in response to the temperature increases that may cause a
system malfunctions. You can also use the DOS version of the "DiskOnChip"
socket by issuing commands from the DOS prompt without the necessity of other
software supports. The "DiskOnChip" supports up to 72 MB. If a un-expect
program cause halts, the watchdog timer will automatically reset the CPU or
generate an interrupt. The watchdog is designed for pure hardware and doesn't
need any arithmetical functions of a real-time clock chip. This ensures the
reliability in an unmanned or standalone system.
3
Advertisement
Table of Contents
