Caution On Unpacking And Before Installation - BOSER Technology HS-5200 Manual

2.2 Caution on Unpacking and Before Installation

First of all, please follow with all necessary steps of section 2.1 in
protection the CPU Card from electricity discharge. With refer to section
1.3, please check the delivery package again with following steps:
1. Unpacking the CPU Card, keep well storage of all packing material,
manual and diskette etc. if has.
2. Is there any components lose or drop from the board? DO NOT
INSTALL IF HAPPENED.
3. Is there any visual damaged of the board? DO NOT INSTALL IF
HAPPENED.
4. Well check from your optional parts (i.e. CPU, SRAM, DRAM,
ROM-Disk etc.) for completed setting all necessary jumpers setting to
jumper pin-set and CMOS setup correctly. Please also reference to all
information of jumpers setting in this manual.
5. Well check from your external devices (i.e. Add-On-Card, Driver Type
etc.) for completed add-in or connection and CMOS setup correctly.
Please also reference to all information of connector connection in this
manual.
6. Please keep all necessary manual and diskette in a good condition for
your necessary re-installation if you change your Operating System or
whatever needs.
8