Sony VENICE MPC-3610 Operating Instructions Manual page 34

000 34
3. Camera Operations: Operations on the Home Screen of the Sub Display
Home Screen Items on the Sub Display
The names of items and corresponding setting values are given below.
Default values are shown underlined and in
Item Description
FPS Sets the shooting frame rate.
Variable/Fixed: Switch between variable speed and constant speed shooting.
When "Fixed" is selected, the setting is determined by the Project category >
Project Frame Rate (page 40) setting in the menu.
Project Frame Rate
23.98
24
25
29.97
50
59.94
When "Variable" is selected, the setting changes as follows depending on the
Project category > Imager Mode (page 50) setting in the menu.
Imager Mode
3.8K 16:9
4K 17:9
3.8K 16:9 Surround View
4K 17:9 Surround View
4K 4:3
4K 4:3 Anamorphic Surround
4K 6:5
6K 17:9
6K 1.85:1
6K 3:2
bold text.
Display
Fixed-24
Fixed-24
Fixed-25
Fixed-30
Fixed-50
Fixed-60
Setting
1 to 60 FPS
1 to 48 FPS
1 to 30 FPS
1 to 25 FPS
Item Description
Exposure Index Sets the EI value. The setting changes as follows depending on the Project > Basic
Setting > Base ISO (page 50) setting in the full menu.
ISO 500:
125EI/160EI/200EI/250EI/320EI/400EI/500EI/640EI/800EI/1000EI/1250EI/
1600EI/2000EI
ISO 2500:
640EI/800EI/1000EI/1250EI/1600EI/2000EI/2500EI/3200EI/4000EI/5000EI/
6400EI/8000EI/10000EI
Shutter Sets the electronic shutter angle/shutter speed.
Press the Step/Cont. button (ITEM key 1) to switch between step and continuous
selection methods.
Step: Select from up to 16 preset values registered as shutter steps. You can press
the Step Edit button (ITEM key 4) to change any setting from the preset value
after selection.
Displays the following selection options depending on the Technical >
System Configuration > Shutter Mode (page 56) setting in the full menu.
Angle: Shutter angle indicator
Default selection options
360/180/172.8/144/90/45/22.5/11.2/5.6
Speed: Shutter speed indicator
Default selection options
1/24, 1/25, 1/30, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
[Note]
The default speed values for different Project Frame Rate (page 40) settings are
given below.
23.98/24: 1/24, 25: 1/25, 29.97: 1/30, 50: 1/50, 59.94: 1/60
Cont.: Select an angle/speed within the supported range.
ND Filter Sets the ND filter position. The following settings are available.
Clear/0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4
1)