Handling Sxs Memory Cards - Sony VENICE MPC-3610 Operating Instructions Manual

000 23
2. Preparation

Handling SxS Memory Cards

This unit records audio and video on SxS memory
cards (optional) loaded in the card slots.
About SxS Memory Cards
Use the following Sony SxS memory cards or XQD
memory cards.*
* When using an XQD memory card, the XQD ExpressCard
adaptor (QDA-EX1) is required.
The supported memory cards differ depending on
the recording format.
SxS PRO+
SBP-256D/E, SBP-128B/C/D/E, SBP-64B/C/D/E:
Supported for all recording formats
SxS PRO
SBP-64A, SBP-32:
MPEG 1920×1080i, HD ProRes 422,
HD ProRes 422 Proxy
SxS-1
SBS-128G1B/C, SBS-64G1A/B/C, SBS-32G1A/B/C:
MPEG 1920×1080i, HD ProRes 422,
HD ProRes 422 Proxy
XQD memory card S series, G series
QD-S64E, QD-S32E, QD-G128A/E, QD-G64A/E,
QD-G32A/E: Supported for all recording formats
XQD memory card N series, M series
QD-N64, QD-M128A, QD-M64A, QD-M32A:
MPEG 1920×1080i, HD ProRes 422 Proxy
Operations are not guaranteed with other memory
cards.
These memory cards comply with the ExpressCard
standard.
For details on using SxS memory cards and usage-related
precautions, refer to the instruction manual for the SxS memory
card.
ˎ SxS, SxS PRO, and SxS-1 are trademarks of Sony ˎ
Corporation.
ˎ XQD is a trademark of Sony Corporation. ˎ
ˎ The ExpressCard word mark and logo are ˎ
owned by Personal Computer Memory Card
International Association (PCMCIA) and are
licensed to Sony Corporation.
ˎ ProRes is a registered trademark of Apple Inc. ˎ
All other trademarks are the property of their
respective owners.
Inserting an SxS Memory Card
1
Open the cover of the card slot block
(page 8).
2
Insert the SxS memory card into the slot with
the SxS label facing to the right.
The ACCESS lamp (page 7) lights in red
then changes to green once the memory card
is ready for use.
3
Close the cover.
ACCESS lamp status
Card slots A and B each have an ACCESS lamp that
indicate the slot status.
Lamp Slot status
Lights in red Accessing the SxS memory card
(writing/reading data)
Lights in green Standby (ready for recording or
playback using the SxS memory
card)
Off ˎ No SxS memory card is loaded. ˎ
ˎ The loaded card is invalid. ˎ
ˎ An SxS memory card is loaded, ˎ
but the other slot is selected.
Removing an SxS Memory Card
1
Open the cover of the card slot block.
2
Pull out the SxS memory card.
[Note]
Data integrity is not guaranteed if the power is turned off or
a memory card is removed while it is being accessed. Data
on the card may be destroyed. Be sure that its ACCESS lamp
is lit in green or off when you turn off the power or remove a
memory card.
Switching Between SxS Memory
Cards
When SxS memory cards are loaded in both slot A
and slot B, you can press the SLOT SELECT button
(page 8) to select the SxS memory card to use.
If a card becomes full, recording continues after
automatically switching to the second card.
[Note]
The SLOT SELECT button is disabled while recording/
playback is in progress. The memory cards are not switched
even if you press the button.