Table of Contents
Advertisement
Installing a Root Certificate
Save the certificate to the device. If no error appears when you save the certificate, it was most likely saved to the device. To
make sure that the certificate persists through cold boots, install the certificate to the \IPSM folder.
1. To verify that the certificate is recognized by the operating system, tap Start > Settings > System tab > Certificates
> Root tab. This opens the Certificates window, which displays all the certificates the operating system recognizes.
1. Scroll through this list until you see the certificate you installed.
2. After you have identified your certificate in the list, tap OK to close.
3. To use the certificate in a network profile, single-tap the Client icon in the command bar
4. Tap on a port on the main window and select Configure.
5. Tap the Server tab and select the certificate from the Certificate issuer must be drop-down list.
6. Tap OK to save the setting and close the port configuration.
Dolphin® 7850 Series User's Guide–
Preliminary
Rev (b)
5/15/2007
.
8 - 19
Advertisement
Table of Contents
