Table of Contents
Advertisement
Field
*In order to function properly, certificates must be recognized by both the Client and the operating system. For more
information, see
Certificates
Configuring a Port
On the main window, tap on a port and tap Configure. Complete the
Tab
(see page 8-11).
Wireless Networks Tab
Field
Available Networks Displays the networks the device recognizes as available to connect to.
Move to Configured
Refresh
Configured Networks Displays the configured network profiles saved in the device. The order of the network profiles in
this list is the same order (from the top down) that the device uses to connect to a network.
default
Up & Down
8 - 10
Description
on page
8-18.
Description
Activates after the available networks have been retrieved. Select the network you wish to
connect to, and tap Move to Configured. This selects the network and moves it to the Configured
Networks list.
Displays a list of networks broadcasting their availability.
You can also attach to networks that are not broadcasting.
This is the default network configuration that installs when the Client installs. This network profile
associates with any network and is already configured with standard settings. You can modify
this setting to match your desired connection.
If you are in a location with only one AP (or more than one AP that attaches to the same
network), the default profile may be sufficient without requiring the selection of a specific network
or networks.
If default is last in the list, it can act as a wildcard if the device is out of range of the primary
networks (listed first).
Do NOT place default at the top or middle of the list if you are connecting to other networks! If
default is any place other than last, connection to the other list entries is never attempted.
Note: Note that there is nothing special about the name "default". You could configure any other
record similarly and it would behave the same way.
Moves a selected network up or down one place in the list.The order of the networks in this list is
the exact order that connections will be attempted. The network listed first will be attempted first
and so on. Place your primary networks first.
Rev (b)
5/15/2007
Wireless Networks Tab
(see page 8-10) and the
Dolphin® 7850 Series User's
Protocol
Guide–Preliminary
Advertisement
Table of Contents
