Supplying Power To The Quadcharger; Charging Batteries In The Quadcharger; Recommendations For Storing Batteries - HandHeld Dolphin 7850 Series User Manual

Supplying Power to the QuadCharger

Use the power adapter cable that comes with the QuadCharger so that the input voltage is adjusted appropriately.
1. Locate the AC power adapter cable and plug it into the power source.
2. Connect the power cable to the power adapter.
3. Connect the power cable to the supply connector on the back of the QuadCharger.
4. Press the power switch to the ON position.
The power LED lights green, and the charger performs a self-diagnostic test that lasts approximately five seconds.

Charging Batteries in the QuadCharger

For best results, battery packs should be at room temperature before recharging them because temperature impacts charging.
The recommended temperature range is 50° to 95° F (10° to 35° C).
1. Supply the QuadCharger with power and turn the power switch on.
2. Insert batteries into the appropriate slots. The Status LED for each slot turns orange to indicate that the battery has begun a
charge cycle.
3. When the Status LED turns green, the battery in the slot has completed charging.

Recommendations for Storing Batteries

To maintain top performance from batteries, follow these storage guidelines:
• Avoid storing batteries outside of the specified temperature range of -4° to 104° F (-20° to 40°C) or in extremely high humidity.
• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
Dolphin® 7850 Series User's Guide–
Preliminary
Rev (b)
5/15/2007
11 - 3