Table of Contents
Advertisement
Network Cards
The Connections tab (see
Connections Tab
installed in the terminal.
1. Tap Start > Settings > Connections > Network Cards
2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK to confirm the changes. The following message appears:
4. You must perform a soft reset to update the registry entries; see
reset, the new registry entries are created and can be read by the applications that need them.
Do NOT perform a
Hard Reset (Cold Boot)
!
to factory defaults, which erases network adapter modifications made here.
7 - 12
on page 7-6) contains a Network Cards icon
Soft Reset (Warm Boot)
(see page 3-13)
after modifying an adapter here. Hard resets return the terminal
Rev (b)
5/15/2007
that displays the network cards
on page
3-13.
During the soft
Dolphin® 7850 Series User's
Guide–Preliminary
Advertisement
Table of Contents
