Using The Dolphin Mobile Charger - HandHeld Dolphin 7850 Series User Manual

Using the Dolphin Mobile Charger

The Dolphin Mobile Charger connects the terminal to a vehicle power source. This cable powers the terminal and charges the
main battery pack.
Using the Dolphin Mobile Charger Inside a Vehicle
Using the Dolphin Mobile Charger in combination with the Dolphin Mobile Mount powers and secures the terminal inside a
vehicle.
1. Insert the terminal into the Mobile Mount.
2. Install the Mobile Mount inside the vehicle.
3. Plug the Terminal Connector
panel of the terminal.
4. Tighten the Jackscrews
5. Plug the Vehicle Power Adapter
Note: Dolphin terminals contain an intelligent battery charging system that monitors the charging of the battery pack to protect
the battery from damage by overcharging if left connected to a charging peripheral indefinitely.
Dolphin® 7850 Series User's Guide–
Preliminary
Terminal Connector
Terminal
Connector
The terminal connector connects the communication cable to the mechanical
connector (see
in this connector work only with the mechanical connector on the terminal.
Jackscrews
Jackscrews
The jackscrews secure the terminal connector to the mechanical connector
on the terminal. Once the terminal connector is plugged into the mechanical
connector on the bottom panel of the terminal, turn both jackscrews to the
right to secure the connection.
Vehicle Power Adapter
The vehicle power adapter plugs into a standard vehicle power source and
converts voltage to the 9.5 volts DC required by the terminal.
Vehicle
Power
Adapter
(see page 12-3) of the Dolphin Mobile Charger into the mechanical connector on the bottom
(see page 12-3).
(see page 12-3) into the vehicle power outlet.
Mechanical Connector
Rev (b)
5/15/2007
on page 3-8) on the terminal. The pins
12 - 3