Stamina 40-0058 Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 3
Attach the MOUNTING BRACKET(6) to the HANDLEBAR POST(10) with ROUND HEAD SCREWS
(M5x0.8x15mm)(7).
STEP 4
Install two AA batteries into the METER(1), the batteries are not included. See page 9 for detailed battery
installation instructions. Slide the METER(1) onto the MOUNTING BRACKET(6). Plug the SENSOR
WIRE(43) into the connecting wire of the METER(1).
STEP 5
Refer to the illustration below. Hook the RESISTANCE TUBES(22) to the D RINGS(25) with the LINKS(55)
on both sides.
8