Remote Network Control; Network Connections - AJA Ki Pro Installation And Operation Manual

Remote Network Control

Network
Connections
Ki Pro Installation and Operation Manual — Remote Network Control
Topics Here TBD.
WiFi versus wired-Ethernet
.
Ki Pro Wireless Connection
STATUS CLIP xxxxxxxx 1 4% S
SELECT ADJUST
REEL xxx 00:01:21:13
CONFIG
MEDIA DELETE SLOT
CLIP
802.11
wireless
Airport
iPhone
Wireless
Router
WAN/ISP
Ki Pro Networking Example
Ki Pro can be networked directly to a MacBook Pro or Mac using a single Ethernet cable
(straight or cross-over)—or it can be connected to a local area network (LAN). If
wireless networking is desired, Ki Pro can also be controlled via an iPhone or laptop
browser using 802.11 and communicating through a wireless access point (Airport).
In hard-wired configurations, Ki Pro connects via its 10/100/100 Base-TX Ethernet
connector. In a direct connection, you simply connect the Ki Pro to an Ethernet-
equipped computer having a browser using a Cat-5 cable. If connecting via a LAN, you
then connect the Ki Pro's Ethernet connector to a hub or switch on the LAN. A LAN is a
shared network that includes other Ethernet devices all attached via a hub or digital
switch. LANs may be divided into zones separated by software or hardware routers.
Devices on a LAN have IP addresses which may be fixed and permanent, or dynamically
assigned by the network (DHCP). When attaching Ki Pro to a LAN, you should first talk
to your network administrator and find out how they want it connected (static IP or
DHCP). Your IT department will be able to supply the information you need to install Ki
Pro on a LAN.
Laptop
w/Web Browser
for Remote
Control
Ki Pro Wired Connectionion ion
STATUS CLIP xxxxxxxx 1 4% S
SELECT ADJUST
REEL xxx 00:01:21:13
CONFIG
MEDIA DELETE SLOT
CLIP
10/100/1000 Base-T
Hub
10/100 Base-T
Firewall
& Router
1
LAN
25