AJA Ki Pro Installation And Operation Manual page 25

22
Optional Rod Accessory Kit Assembly
Kit components:
2 endplates
4 screws with matching Knobs
(Note: 15mm rods to be supplied by customer)
For most uses with an Exoskeleton, you'll want to first mount the camera or
camcorder to the adjustable mount on top, before sliding in the Ki Pro unit and
locking it. To mount a camera, follow these steps:
1. Locate the camera mount locking knob on the Exoskeleton and loosen it.
2. Slide the camera mount off of the mounting rail.
3. Place the camera on the mount, orienting the mount's alignment pin to
camera's corresponding pin socket. Once aligned, tighten the mounting screw
to secure the camera.
4. Slide the camera and mount back on the rail and tighten the locking knob.
Exoskeleton Camera Mounting