Press Arm Adjustment - Pacific Zuma Leg Press Option Assembly Instructions Manual

Zuma Leg Press Option Assembly Instructions

1. Press Arm Adjustment

A. Place the Weight Pin in the Selector Stem under
the Top Cap Weight to ensure the least cable
resistance.
B. To adjust the tension of the Main Cable, rotate the
Bumper Pad against the Press Arm.
C. After properly adjusting the cable tension, tighten
the locknut against the Bumper Pad.
D. Check the weights. Move the Weight Pin to each
Weight and Selector Stem location.
E. Replace the Weight Pin into the Top Cap Weight.
Refer to the illustration in view A.
Step 1. Press Arm Adjustment
Top Cap
Weight
A
Weight Pin
1 2
B
Bumper Pad
Press Arm
Selector Stem
C
Locknut
D
Press Arm
Weight Pin
3 4
Main Upright
Main Upright
5 6
page 14