Zuma Leg Press Option Assembly Instructions
4
Cable Adjustments
Once the Leg Press option is assembled, you must
check the Cables for proper tension. For example, make
sure that:
✔ Excess slack exists in the cable.
✔ The Top Cap Weight does not rest squarely on the
Weight Stack.
✔ The Cable does not rub the inside edges of the
pulleys.
CAUTION: Take the time to perform these steps. If
the cables do not have the proper tension, you
could damage the machine and void the Precor
Limited Warranty.
Adjustments to the cable can be made in two places.
❑ the Press Arm Bumper Pad.
❑ the Black Cam Stop on the Support Arm.
Note: For adjustments to the Selector Stem, refer to
your Zuma Assembly Instructions and Maintenance
Guide .
Cable Adjustments
Location of Bumper Pad
on the Press Arm
Location of Black
Cam Stop
1
2
3
4
5
6
page 13