Gree GWH09YC-K6DNA1A Service Manual page 74

Service Manual
Step
3.Remove display and panel
a. Screws that are locking the display board.
Separate the display board from the front
panel.
b.
Open the front panel; separate the panel
rotation shaft from the groove fixing the
front panel and then removes the front
panel.
4.Remove detecting plate and electric box cover2
Remove the screws fixing detecting plate
and remove detecting plate.
Remove the screws fixing electric box
cober2 and remove electric box2.
5.Remove front case sub-assy
Remove the screws fixing front case.
Loosen the clasps of front case Life the
front case sub-assy upwards to remove
it.
6. Remove vertical louver
Loosen the connection clasps between
vertical louver and bottom case to
remove vertical louver.
Installation and Maintenance
Procedure
Panel
Panel rotation
Groove
Detecting plate
Screws
Vertical louver
Clasps
Screws
Display
Electric box cover 2
Screw
Front case sub-assy
Clasps
71